Cisco IE-3000-8TC Command Reference - Page 504
show vlan
![]() |
View all Cisco IE-3000-8TC manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 504 highlights
show vlan Chapter 2 IE 3000 Switch Cisco IOS Commands show vlan Use the show vlan user EXEC command to display the parameters for all configured VLANs or one VLAN (if the VLAN ID or name is specified) on the switch. show vlan [brief | id vlan-id | mtu | name vlan-name | remote-span | summary] [ | {begin | exclude | include} expression] Syntax Description brief id vlan-id mtu name vlan-name remote-span summary | begin | exclude | include expression (Optional) Display one line for each VLAN with the VLAN name, status, and its ports. (Optional) Display information about a single VLAN identified by VLAN ID number. For vlan-id, the range is 1 to 4094. (Optional) Display a list of VLANs and the minimum and maximum transmission unit (MTU) sizes configured on ports in the VLAN. (Optional) Display information about a single VLAN identified by VLAN name. The VLAN name is an ASCII string from 1 to 32 characters. (Optional) Display information about Remote SPAN (RSPAN) VLANs. (Optional) Display VLAN summary information. (Optional) Display begins with the line that matches the expression. (Optional) Display excludes lines that match the expression. (Optional) Display includes lines that match the specified expression. Expression in the output to use as a reference point. Note Though visible in the command-line help string, the ifindex, internal usage, and private-vlan keywords are not supported. Command Modes User EXEC Command History Release 12.2(44)EX Modification This command was introduced. Usage Guidelines In the show vlan mtu command output, the MTU_Mismatch column shows whether all the ports in the VLAN have the same MTU. When yes appears in this column, it means that the VLAN has ports with different MTUs, and packets that are switched from a port with a larger MTU to a port with a smaller MTU might be dropped. If the VLAN does not have an SVI, the hyphen (-) symbol appears in the SVI_MTU column. If the MTU-Mismatch column displays yes, the names of the port with the MinMTU and the port with the MaxMTU appear. Expressions are case sensitive. For example, if you enter | exclude output, the lines that contain output do not appear, but the lines that contain Output appear. 2-478 Cisco IE 3000 Switch Command Reference OL-13019-01
![](/manual_guide/products/cisco-ie30008tc-command-reference-94363f4/504.png)