Cisco IE-3000-8TC Command Reference - Page 262

mls qos srr-queue input cos-map Chapter 2 IE 3000 Switch Cisco IOS Commands You can map each CoS value to a different queue and threshold combination, allowing the frame to follow different behavior. Examples This example shows how to map CoS values 0 to 3 to ingress queue 1 and to threshold ID 1 with a drop threshold of 50 percent. It maps CoS values 4 and 5 to ingress queue 1 and to threshold ID 2 with a drop threshold of 70 percent: Switch(config)# mls qos srr-queue input cos-map queue 1 threshold 1 0 1 2 3 Switch(config)# mls qos srr-queue input cos-map queue 1 threshold 2 4 5 Switch(config)# mls qos srr-queue input threshold 1 50 70 You can verify your settings by entering the show mls qos maps privileged EXEC command. Related Commands Command mls qos srr-queue input bandwidth mls qos srr-queue input buffers mls qos srr-queue input dscp-map mls qos srr-queue input priority-queue mls qos srr-queue input threshold show mls qos maps Description Assigns shaped round robin (SRR) weights to an ingress queue. Allocates the buffers between the ingress queues. Maps Differentiated Services Code Point (DSCP) values to an ingress queue or maps DSCP values to a queue and to a threshold ID. Configures the ingress priority queue and guarantees bandwidth. Assigns WTD threshold percentages to an ingress queue. Displays QoS mapping information. 2-236 Cisco IE 3000 Switch Command Reference OL-13019-01