Cisco IE-3000-8TC Command Reference - Page 129
dot1x test eapol-capable - f1 ports
![]() |
View all Cisco IE-3000-8TC manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 129 highlights
Chapter 2 IE 3000 Switch Cisco IOS Commands dot1x test eapol-capable dot1x test eapol-capable Use the dot1x test eapol-capable privileged EXEC command to monitor IEEE 802.1x activity on all the switch ports and to display information about the devices that are connected to the ports that support IEEE 802.1x. dot1x test eapol-capable [interface interface-id] Syntax Description interface interface-id (Optional) Port to be queried. Defaults There is no default setting. Command Modes Privileged EXEC Command History Release 12.2(44)EX Modification This command was introduced. Usage Guidelines Use this command to test the IEEE 802.1x capability of the devices connected to all ports or to specific ports on a switch. There is not a no form of this command. Examples This example shows how to enable the IEEE 802.1x readiness check on a switch to query a port. It also shows the response received from the queried port verifying that the device connected to it is IEEE 802.1x-capable: switch# dot1x test eapol-capable interface gigabitethernet1/2 DOT1X_PORT_EAPOL_CAPABLE:DOT1X: MAC 00-01-02-4b-f1-a3 on gigabitethernet1/2 is EAPOL capable Related Commands Command dot1x test timeout timeout Description Configures the timeout used to wait for EAPOL response to an IEEE 802.1x readiness query. OL-13019-01 Cisco IE 3000 Switch Command Reference 2-103
![](/manual_guide/products/cisco-ie30008tc-command-reference-94363f4/129.png)