Cisco IE-3000-8TC Command Reference - Page 130

dot1x test timeout Chapter 2 IE 3000 Switch Cisco IOS Commands dot1x test timeout Use the dot1x test timeout global configuration command on the switch stack or on a standalone switch to configure the timeout used to wait for EAPOL response from a port being queried for IEEE 802.1x readiness. dot1x test timeout timeout Syntax Description timeout Time in seconds to wait for an EAPOL response. The range is from 1 to 65535 seconds. Defaults The default setting is 10 seconds. Command Modes Global configuration Command History Release 12.2(44)EX Modification This command was introduced. Usage Guidelines Use this command to configure the timeout used to wait for EAPOL response. There is not a no form of this command. Examples This example shows how to configure the switch to wait 27 seconds for an EAPOL response: Switch# dot1x test timeout 27 You can verify the timeout configuration status by entering the show run privileged EXEC command. Related Commands Command dot1x test eapol-capable [interface interface-id] Description Checks for IEEE 802.1x readiness on devices connected to all or to specified IEEE 802.1x-capable ports. 2-104 Cisco IE 3000 Switch Command Reference OL-13019-01