Cisco IE-3000-8TC Command Reference - Page 51
show auto qos interface, cos-dscp, dscp-cos, mls qos srr-queue input bandwidth
![]() |
View all Cisco IE-3000-8TC manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 51 highlights
Chapter 2 IE 3000 Switch Cisco IOS Commands auto qos voip Examples This example shows how to enable auto-QoS and to trust the QoS labels received in incoming packets when the switch or router connected to the port is a trusted device: Switch(config)# interface gigabitethernet1/1 Switch(config-if)# auto qos voip trust You can verify your settings by entering the show auto qos interface interface-id privileged EXEC command. Related Commands Command debug auto qos mls qos cos mls qos map {cos-dscp dscp1 ... dscp8 | dscp-cos dscp-list to cos} mls qos queue-set output buffers mls qos srr-queue input bandwidth mls qos srr-queue input buffers mls qos srr-queue input cos-map mls qos srr-queue input dscp-map mls qos srr-queue input priority-queue mls qos srr-queue output cos-map mls qos srr-queue output dscp-map mls qos trust queue-set show auto qos show mls qos interface srr-queue bandwidth shape srr-queue bandwidth share Description Enables debugging of the auto-QoS feature. Defines the default CoS value of a port or assigns the default CoS to all incoming packets on the port. Defines the CoS-to-DSCP map or the DSCP-to-CoS map. Allocates buffers to a queue-set. Assigns shaped round robin (SRR) weights to an ingress queue. Allocates the buffers between the ingress queues. Maps CoS values to an ingress queue or maps CoS values to a queue and to a threshold ID. Maps DSCP values to an ingress queue or maps DSCP values to a queue and to a threshold ID. Configures the ingress priority queue and guarantees bandwidth. Maps CoS values to an egress queue or maps CoS values to a queue and to a threshold ID. Maps DSCP values to an egress queue or maps DSCP values to a queue and to a threshold ID. Configures the port trust state. Maps a port to a queue-set. Displays auto-QoS information. Displays QoS information at the port level. Assigns the shaped weights and enables bandwidth shaping on the four egress queues mapped to a port. Assigns the shared weights and enables bandwidth sharing on the four egress queues mapped to a port. OL-13019-01 Cisco IE 3000 Switch Command Reference 2-25
![](/manual_guide/products/cisco-ie30008tc-command-reference-94363f4/51.png)