Cisco IE-3000-8TC Command Reference - Page 367

Chapter 2 IE 3000 Switch Cisco IOS Commands show dot1x show dot1x Use the show dot1x user EXEC command to display IEEE 802.1x statistics, administrative status, and operational status for the switch or for the specified port. show dot1x [{all [summary] | interface interface-id} [details | statistics]] [ | {begin | exclude | include} expression] Syntax Description all [summary] interface interface-id details statistics | begin | exclude | include expression (Optional) Display the IEEE 802.1x status for all ports. (Optional) Display the IEEE 802.1x status for the specified port (including type, module, and port number). (Optional) Display the IEEE 802.1x interface details. (Optional) Display IEEE 802.1x statistics for the specified port. (Optional) Display begins with the line that matches the expression. (Optional) Display excludes lines that match the expression. (Optional) Display includes lines that match the specified expression. Expression in the output to use as a reference point. Command Modes User EXEC Command History Release 12.2(44)EX Modification This command was introduced. Usage Guidelines If you do not specify a port, global parameters and a summary appear. If you specify a port, details for that port appear. If the port control is configured as unidirectional or bidirectional control and this setting conflicts with the switch configuration, the show dot1x {all | interface interface-id} privileged EXEC command output has this information: ControlDirection = In (Inactive) Expressions are case sensitive. For example, if you enter | exclude output, the lines that contain output are not displayed, but the lines that contain Output appear. Examples This is an example of output from the show dot1x user EXEC command: Switch> show dot1x Sysauthcontrol Dot1x Protocol Version Critical Recovery Delay Critical EAPOL Enabled 2 100 Disabled OL-13019-01 Cisco IE 3000 Switch Command Reference 2-341