Cisco IE-3000-8TC Command Reference - Page 139

Chapter 2 IE 3000 Switch Cisco IOS Commands errdisable recovery cause small-frame errdisable recovery cause small-frame Use the errdisable recovery cause small-frame global configuration command on the switch to enable the recovery timer for ports to be automatically re-enabled after they are error disabled by the arrival of small frames. Use the no form of this command to return to the default setting. errdisable recovery cause small-frame no errdisable recovery cause small-frame Syntax Description This command has no arguments or keywords. Defaults This feature is disabled. Command Modes Global configuration Command History Release 12.2(44)EX Modification This command was introduced. Usage Guidelines This command enables the recovery timer for error-disabled ports. You configure the recovery time by using the errdisable recovery interval interval interface configuration command. Examples This example shows how to set the recovery timer: Switch(config)# errdisable recovery cause small-frame You can verify your setting by entering the show interfaces user EXEC command. Related Commands Command errdisable detect cause small-frame show interfaces small violation-rate Description Allows any switch port to be put into the error-disabled state if an incoming frame is smaller than the configured minimum size and arrives at the specified rate (threshold). Displays the interface settings on the switch, including input and output flow control. Configures the size for an incoming (small) frame to cause a port to be put into the error-disabled state. OL-13019-01 Cisco IE 3000 Switch Command Reference 2-113