Cisco IE-3000-8TC Command Reference - Page 474
mvr global configuration, show mvr, show mvr members, show mvr interface, members
![]() |
View all Cisco IE-3000-8TC manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 474 highlights
show mvr interface Chapter 2 IE 3000 Switch Cisco IOS Commands In the preceding display, Status is defined as follows: • Active means the port is part of a VLAN. • Up/Down means that the port is forwarding/nonforwarding. • Inactive means that the port is not yet part of any VLAN. This is an example of output from the show mvr interface command for a specified port: Switch# show mvr interface gigabitethernet1/2 Type: RECEIVER Status: ACTIVE Immediate Leave: DISABLED This is an example of output from the show mvr interface interface-id members command: Switch# show mvr interface gigabitethernet1/2 members 239.255.0.0 DYNAMIC ACTIVE 239.255.0.1 DYNAMIC ACTIVE 239.255.0.2 DYNAMIC ACTIVE 239.255.0.3 DYNAMIC ACTIVE 239.255.0.4 DYNAMIC ACTIVE 239.255.0.5 DYNAMIC ACTIVE 239.255.0.6 DYNAMIC ACTIVE 239.255.0.7 DYNAMIC ACTIVE 239.255.0.8 DYNAMIC ACTIVE 239.255.0.9 DYNAMIC ACTIVE Related Commands Command mvr (global configuration) mvr (interface configuration) show mvr show mvr members Description Enables and configures multicast VLAN registration on the switch. Configures MVR ports. Displays the global MVR configuration on the switch. Displays all receiver ports that are members of an MVR multicast group. 2-448 Cisco IE 3000 Switch Command Reference OL-13019-01
![](/manual_guide/products/cisco-ie30008tc-command-reference-94363f4/474.png)