Cisco IE-3000-8TC Command Reference - Page 325
Cisco IE 3000 Switch Command Reference, OL-13019-01, IE 3000 Switch, Cisco IOS Commands, setup
![]() |
View all Cisco IE-3000-8TC manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 325 highlights
Chapter 2 IE 3000 Switch Cisco IOS Commands setup Enter host name [Switch]:host-name The enable secret is a password used to protect access to privileged EXEC and configuration modes. This password, after entered, becomes encrypted in the configuration. Enter enable secret: enable-secret-password The enable password is used when you do not specify an enable secret password, with some older software versions, and some boot images. Enter enable password: enable-password The virtual terminal password is used to protect access to the router over a network interface. Enter virtual terminal password: terminal-password Configure SNMP Network Management? [no]: yes Community string [public]: Current interface summary Any interface listed with OK? value "NO" does not have a valid configuration Interface Vlan1 IP-Address OK? Method Status 172.20.135.202 YES NVRAM up Protocol up GigabitEthernet1/1 unassigned YES unset up up GigabitEthernet1/2 unassigned YES unset up down Port-channel1 unassigned YES unset up down Enter interface name used to connect to the management network from the above interface summary: vlan1 Configuring interface vlan1: Configure IP on this interface? [yes]: yes IP address for this interface: ip_address Subnet mask for this interface [255.0.0.0]: subnet_mask Would you like to enable as a cluster command switch? [yes/no]: yes Enter cluster name: cluster-name The following configuration command script was created: hostname host-name enable secret 5 $1$LiBw$0Xc1wyT.PXPkuhFwqyhVi0 enable password enable-password line vty 0 15 password terminal-password snmp-server community public ! no ip routing ! interface GigabitEthernet1/1 no ip address ! interface GigabitEthernet1/2 no ip address ! OL-13019-01 Cisco IE 3000 Switch Command Reference 2-299
![](/manual_guide/products/cisco-ie30008tc-command-reference-94363f4/325.png)