Cisco IE-3000-8TC Command Reference - Page 480
show parser macro
![]() |
View all Cisco IE-3000-8TC manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 480 highlights
show parser macro Chapter 2 IE 3000 Switch Cisco IOS Commands # Recommended value for access vlan (AVID) should not be 1 switchport access vlan $AVID switchport mode access Macro name : cisco-phone Macro type : default interface # Cisco IP phone + desktop template # macro keywords $AVID $VVID # VoIP enabled interface - Enable data VLAN # and voice VLAN (VVID) # Recommended value for access vlan (AVID) should not be 1 switchport access vlan $AVID switchport mode access Macro name : cisco-switch Macro type : default interface # macro keywords $NVID # Access Uplink to Distribution # Do not apply to EtherChannel/Port Group # Define unique Native VLAN on trunk ports # Recommended value for native vlan (NVID) should not be 1 switchport trunk native vlan $NVID Macro name : cisco-router Macro type : default interface # macro keywords $NVID # Access Uplink to Distribution # Define unique Native VLAN on trunk ports # Recommended value for native vlan (NVID) should not be 1 switchport trunk native vlan $NVID Macro name : snmp Macro type : customizable #enable port security, linkup, and linkdown traps snmp-server enable traps port-security snmp-server enable traps linkup snmp-server enable traps linkdown #set snmp-server host snmp-server host ADDRESS #set SNMP trap notifications precedence snmp-server ip precedence VALUE This is an example of output from the show parser macro name command: Switch# show parser macro name standard-switch10 Macro name : standard-switch10 Macro type : customizable 2-454 Cisco IE 3000 Switch Command Reference OL-13019-01
![](/manual_guide/products/cisco-ie30008tc-command-reference-94363f4/480.png)