Cisco IE-3000-8TC Command Reference - Page 70
clear errdisable interface
![]() |
View all Cisco IE-3000-8TC manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 70 highlights
clear errdisable interface Chapter 2 IE 3000 Switch Cisco IOS Commands clear errdisable interface Use the clear errdisable interface privileged EXEC command to re-enable a VLAN that was error disabled. clear errdisable interface interface-id vlan [vlan-list] Syntax Description vlan list (Optional) Specify a list of VLANs to be re-enabled. If a vlan-list is not specified, then all VLANs are re-enabled. Command Default No default is defined Command Modes Privileged EXEC Command History Release 12.2(44)EX Modification This command was introduced. Usage Guidelines You can re-enable a port by using the shutdown and no shutdown interface configuration commands, or you can clear error disable for VLANs by using the clear errdisable interface command. Examples This example shows how to re-enable all VLANs that were error-disabled on port Gi1/2. Switch# clear errdisable interface GigabitEthernet1/2 vlan Related Commands Command errdisable detect cause errdisable recovery show errdisable detect show errdisable recovery show interfaces status err-disabled Description Enables error-disabled detection for a specific cause or all causes. Configures the recovery mechanism variables. Displays error-disabled detection status. Display error-disabled recovery timer information. Displays interface status of a list of interfaces in error-disabled state. 2-44 Cisco IE 3000 Switch Command Reference OL-13019-01
![](/manual_guide/products/cisco-ie30008tc-command-reference-94363f4/70.png)