Cisco IE-3000-8TC Command Reference - Page 137

Chapter 2 IE 3000 Switch Cisco IOS Commands errdisable detect cause small-frame errdisable detect cause small-frame Use the errdisable detect cause small-frame global configuration command on the switch to allow any switch port to be error disabled if incoming VLAN-tagged packets are small frames (67 bytes or less) and arrive at the minimum configured rate (the threshold). Use the no form of this command to return to the default setting. errdisable detect cause small-frame no errdisable detect cause small-frame Syntax Description This command has no arguments or keywords. Defaults This feature is disabled. Command Modes Global configuration Command History Release 12.2(44)EX Modification This command was introduced. Usage Guidelines This command globally enables the small-frame arrival feature. Use the small violation-rate interface configuration command to set the threshold for each port. You can configure the port to be automatically re-enabled by using the errdisable recovery cause small-frame global configuration command. You configure the recovery time by using the errdisable recovery interval interval global configuration command. Examples This example shows how to enable the switch ports to be put into the error-disabled mode if incoming small frames arrive at the configured threshold: Switch(config)# errdisable detect cause small-frame You can verify your setting by entering the show interfaces privileged EXEC command. Related Commands Command errdisable recovery cause small-frame errdisable recovery interval interval Description Enables the recovery timer. Specifies the time to recover from the specified error-disabled state. OL-13019-01 Cisco IE 3000 Switch Command Reference 2-111