Cisco IE-3000-8TC Command Reference - Page 157

Chapter 2 IE 3000 Switch Cisco IOS Commands ip admission ip admission Use the ip admission interface configuration command to enable web authentication. You can also use this command in fallback-profile mode. Use the no form of this command to disable web authentication. ip admission rule no ip admission Syntax Description rule Apply an IP admission rule to the interface. Command Modes Global configuration Command History Release 12.2(44)EX Modification This command was introduced. Usage Guidelines The ip admission command applies a web authentication rule to a switch port. Examples This example shows how to apply a web authentication rule to a switchport: Switch# configure terminal Switch(config)# interface gigabitethernet1/1 Switch(config-if)# ip admission rule1 This example shows how to apply a web authentication rule to a fallback profile for use on an IEEE 802.1x enabled switch port. Switch# configure terminal Switch(config)# fallback profile profile1 Switch(config)# ip admission name rule1 Switch(config)# end Related Commands Command dot1x fallback fallback profile ip admission name proxy http show ip admission Description Configure a port to use web authentication as a fallback method for clients that do not support IEEE 802.1x authentication. Enable web authentication on a port Enable web authentication globally on a switch Displays information about NAC cached entries or the NAC configuration. For more information, see the Network Admission Control Software Configuration Guide on Cisco.com. OL-13019-01 Cisco IE 3000 Switch Command Reference 2-131