Cisco IE-3000-8TC Command Reference - Page 397

Chapter 2 IE 3000 Switch Cisco IOS Commands show interfaces Protocol Pkts In Chars In Pkts Out Chars Out No traffic sent or received on this interface. This is an example of output from the show interfaces capabilities command for an interface. Switch# show interfaces gigabitethernet1/2 capabilities GigabitEthernet1/2 Model: IE-3000-4TC Type: Not Present Speed: 10,100,1000,auto Duplex: half,full,auto Trunk encap. type: 802.1Q Trunk mode: on,off,desirable,nonegotiate Channel: yes Broadcast suppression: percentage(0-100) Flowcontrol: rx-(off,on,desired),tx-(none) Fast Start: yes QoS scheduling: rx-(not configurable on per port basis), tx-(4q3t) (3t: Two configurable values and one fixed.) CoS rewrite: yes ToS rewrite: yes UDLD: yes Inline power: no SPAN: source/destination PortSecure: yes Dot1x: yes Multiple Media Types: rj45, sfp, auto-select This is an example of output from the show interfaces interface description command when the interface has been described as Connects to Marketing by using the description interface configuration command. Switch# show interfaces gigabitethernet1/2 description Interface Status Protocol Description Gi1/2 up down Connects to Marketing This is an example of output from the show interfaces etherchannel command when port channels are configured on the switch: Switch# show interfaces etherchannel ---- Port-channel1: Age of the Port-channel = 03d:20h:17m:29s Logical slot/port = 10/1 Number of ports = 0 GC = 0x00000000 HotStandBy port = null Port state = Port-channel Ag-Not-Inuse Port-channel2: Age of the Port-channel = 03d:20h:17m:29s Logical slot/port = 10/2 Number of ports = 0 GC = 0x00000000 HotStandBy port = null Port state = Port-channel Ag-Not-Inuse Port-channel3: Age of the Port-channel = 03d:20h:17m:29s Logical slot/port = 10/3 Number of ports = 0 GC = 0x00000000 HotStandBy port = null Port state = Port-channel Ag-Not-Inuse OL-13019-01 Cisco IE 3000 Switch Command Reference 2-371