Cisco IE-3000-8TC Command Reference - Page 338
show auto qos, auto qos voip cisco-softphone
View all Cisco IE-3000-8TC manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 338 highlights
show auto qos Chapter 2 IE 3000 Switch Cisco IOS Commands show auto qos Use the show auto qos user EXEC command to display the quality of service (QoS) commands entered on the interfaces on which automatic QoS (auto-QoS) is enabled. show auto qos [interface [interface-id]] Syntax Description interface [interface-id] (Optional) Display auto-QoS information for the specified port or for all ports. Valid interfaces include physical ports. Command Modes User EXEC Command History Release 12.2(44)EX Modification This command was introduced. Usage Guidelines The show auto qos command output shows only the auto-QoS command entered on each interface. The show auto qos interface interface-id command output shows the auto-QoS command entered on a specific interface. Use the show running-config privileged EXEC command to display the auto-QoS configuration and the user modifications. The show auto qos command output also shows the service policy information for the Cisco IP phone. To display information about the QoS configuration that might be affected by auto-QoS, use one of these commands: • show mls qos • show mls qos maps cos-dscp • show mls qos interface [interface-id] [buffers | queueing] • show mls qos maps [cos-dscp | cos-input-q | cos-output-q | dscp-cos | dscp-input-q | dscp-output-q] • show mls qos input-queue • show running-config Examples This is an example of output from the show auto qos command after the auto qos voip cisco-phone and the auto qos voip cisco-softphone interface configuration commands are entered: Switch> show auto qos GigabitEthernet1/1 auto qos voip cisco-softphone GigabitEthernet1/1 auto qos voip cisco-phone GigabitEthernet1/2 auto qos voip cisco-phone 2-312 Cisco IE 3000 Switch Command Reference OL-13019-01