Cisco IE-3000-8TC Command Reference - Page 374

show eap Chapter 2 IE 3000 Switch Cisco IOS Commands Expressions are case sensitive. For example, if you enter | exclude output, the lines that contain output are not displayed, but the lines that contain Output appear. Examples This is an example of output from the show eap registrations privileged EXEC command: Switch> show eap registrations Registered EAP Methods: Method Type Name 4 Peer MD5 Registered EAP Lower Layers: Handle Type Name 2 Authenticator Dot1x-Authenticator 1 Authenticator MAB This is an example of output from the show eap registrations transport privileged user EXEC command: Switch> show eap registrations transport all Registered EAP Lower Layers: Handle Type Name 2 Authenticator Dot1x-Authenticator 1 Authenticator MAB This is an example of output from the show eap sessions privileged EXEC command: Switch> show eap sessions Role: Authenticator Decision: Fail Lower layer: Dot1x-AuthenticaInterface: Gi1/1 Current method: None Method state: Uninitialised Retransmission count: 0 (max: 2) Timer: Authenticator ReqId Retransmit (timeout: 30s, remaining: 2s) EAP handle: 0x5200000A Credentials profile: None Lower layer context ID: 0x93000004 Eap profile name: None Method context ID: 0x00000000 Peer Identity: None Start timeout (s): 1 Retransmit timeout (s): 30 (30) Current ID: 2 Available local methods: None Role: Authenticator Decision: Fail Lower layer: Dot1x-AuthenticaInterface: Gi1/2 Current method: None Method state: Uninitialised Retransmission count: 0 (max: 2) Timer: Authenticator ReqId Retransmit (timeout: 30s, remaining: 2s) EAP handle: 0xA800000B Credentials profile: None Lower layer context ID: 0x0D000005 Eap profile name: None Method context ID: 0x00000000 Peer Identity: None Start timeout (s): 1 Retransmit timeout (s): 30 (30) Current ID: 2 Available local methods: None This is an example of output from the show eap sessions interface interface-id privileged EXEC command: Switch# show eap sessions gigabitethernet1/1 Role: Authenticator Decision: Lower layer: Dot1x-AuthenticaInterface: Current method: None Method state: Retransmission count: 1 (max: 2) Timer: ReqId Retransmit (timeout: 30s, remaining: 13s) EAP handle: 0x5200000A Credentials profile: Lower layer context ID: 0x93000004 Eap profile name: Fail Gi1/1 Uninitialised Authenticator None None 2-348 Cisco IE 3000 Switch Command Reference OL-13019-01