Cisco IE-3000-8TC Command Reference - Page 424

show lacp Chapter 2 IE 3000 Switch Cisco IOS Commands show lacp Use the show lacp user EXEC command to display Link Aggregation Control Protocol (LACP) channel-group information. show lacp [channel-group-number] {counters | internal | neighbor | sys-id} [ | {begin | exclude | include} expression] Syntax Description channel-group-number counters internal neighbor sys-id | begin | exclude | include expression (Optional) Number of the channel group. The range is 1 to 6. Display traffic information. Display internal information. Display neighbor information. Display the system identifier that is being used by LACP. The system identifier is made up of the LACP system priority and the switch MAC address. (Optional) Display begins with the line that matches the expression. (Optional) Display excludes lines that match the expression. (Optional) Display includes lines that match the specified expression. Expression in the output to use as a reference point. Command Modes User EXEC Command History Release 12.2(44)EX Modification This command was introduced. Usage Guidelines You can enter any show lacp command to display the active channel-group information. To display specific channel information, enter the show lacp command with a channel-group number. If you do not specify a channel group, information for all channel groups appears. You can enter the channel-group-number option to specify a channel group for all keywords except sys-id. Expressions are case sensitive. For example, if you enter | exclude output, the lines that contain output do not appear, but the lines that contain Output appear. Examples This is an example of output from the show lacp counters user EXEC command. Table 2-27 describes the fields in the display. Switch> show lacp counters LACPDUs Marker Marker Response LACPDUs Port Sent Recv Sent Recv Sent Recv Pkts Err Channel group:1 Gi1/1 19 10 0 0 0 0 0 Gi1/2 14 6 0 0 0 0 0 2-398 Cisco IE 3000 Switch Command Reference OL-13019-01