Cisco IE-3000-8TC Command Reference - Page 176

ip igmp max-groups Chapter 2 IE 3000 Switch Cisco IOS Commands Examples This example shows how to limit to 25 the number of IGMP groups that a port can join: Switch(config)# interface gigabitethernet1/2 Switch(config-if)# ip igmp max-groups 25 This example shows how to configure the switch to replace the existing group with the new group for which the IGMP report was received when the maximum number of entries is in the forwarding table: Switch(config)# interface gigabitethernet1/1 Switch(config-if)# ip igmp max-groups action replace You can verify your setting by using the show running-config privileged EXEC command and by specifying an interface. Related Commands Command Description show running-config interface interface-id Displays the running configuration on the switch interface, including the maximum number of IGMP groups that an interface can join and the throttling action. For syntax information, select Cisco IOS Configuration Fundamentals Command Reference, Release 12.2 > File Management Commands > Configuration File Management Commands. 2-150 Cisco IE 3000 Switch Command Reference OL-13019-01