Cisco IE-3000-8TC Command Reference - Page 689
debug etherchannel
![]() |
View all Cisco IE-3000-8TC manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 689 highlights
Appendix B IE 3000 Switch Debug Commands debug etherchannel debug etherchannel Use the debug etherchannel privileged EXEC command to enable debugging of the EtherChannel/PAgP shim. This shim is the software module that is the interface between the Port Aggregation Protocol (PAgP) software module and the port manager software module. Use the no form of this command to disable debugging. debug etherchannel [all | detail | error | event | idb] no debug etherchannel [all | detail | error | event | idb] Syntax Description all detail error event idb (Optional) Display all EtherChannel debug messages. (Optional) Display detailed EtherChannel debug messages. (Optional) Display EtherChannel error debug messages. (Optional) Debug major EtherChannel event messages. (Optional) Display PAgP interface descriptor block debug messages. Note Though visible in the command-line help strings, the linecard keyword is not supported. Defaults Debugging is disabled. Command Modes Privileged EXEC Command History Release 12.2(44)EX Modification This command was introduced. Usage Guidelines If you do not specify a keyword, all debug messages appear. The undebug etherchannel command is the same as the no debug etherchannel command. Related Commands Command show debugging show etherchannel Description Displays information about the types of debugging that are enabled. Displays EtherChannel information for the channel. OL-13019-01 Cisco IE 3000 Switch Command Reference B-11
![](/manual_guide/products/cisco-ie30008tc-command-reference-94363f4/689.png)