Cisco IE-3000-8TC Command Reference - Page 39
alarm relay-mode
View all Cisco IE-3000-8TC manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 39 highlights
Chapter 2 IE 3000 Switch Cisco IOS Commands alarm relay-mode alarm relay-mode Use the alarm relay-mode global configuration command to set the alarm relay mode for the switch to positive or negative. Use the no form of the command to set the alarm relay mode to the default mode. alarm relay-mode {negative} no alarm relay-mode {negative} Syntax Description negative Set the alarm relay mode to negative. Defaults By default, the alarm relays are in positive mode when they are open. When there is no power to the switch, all alarm relays are open. The alarm relays close when one or more alarm events are detected. Command Modes Global configuration Command History Release 12.2(44)EX Modification This command was introduced. Usage Guidelines Use this command to invert the behavior of the alarm relays. When the alarm relay mode is set to negative, alarm relays are normally closed. When one or more alarm events are detected, the appropriate alarm relay opens. Examples This example shows how to set the alarm relays to negative mode: Switch(config)# alarm relay-mode negative Related Commands Command alarm profile (global configuration) show alarm profile show alarm settings Description Creates or identifies an alarm profile and enters alarm-profile configuration mode. Displays all alarm profiles or a specified alarm profile and lists the interfaces to which each profile is attached. Displays environmental alarm settings and options. OL-13019-01 Cisco IE 3000 Switch Command Reference 2-13