Cisco IE-3000-8TC Command Reference - Page 502

show version Chapter 2 IE 3000 Switch Cisco IOS Commands show version Use the show version user EXEC command to display version information for the hardware and firmware. show version [ | {begin | exclude | include} expression] Syntax Description | begin | exclude | include expression (Optional) Display begins with the line that matches the expression. (Optional) Display excludes lines that match the expression. (Optional) Display includes lines that match the specified expression. Expression in the output to use as a reference point. Command Modes User EXEC Command History Release 12.2(44)EX Modification This command was introduced. Usage Guidelines Expressions are case sensitive. For example, if you enter | exclude output, the lines that contain output do not appear, but the lines that contain Output appear. Examples This is an example of output from the show version command: Note Though visible in the show version output, the configuration register information is not supported on the switch. switch# show version Cisco IOS Software, IES Software (IES-LANBASE-M), Version 12.2(44)EX, RELEASE SOFTWARE (fc2) Copyright (c) 1986-2008 by Cisco Systems, Inc. Compiled Mon 19-May-08 12:47 by weiliu Image text-base: 0x00003000, data-base: 0x01400000 ROM: Bootstrap program is Xmen2 boot loader BOOTLDR: IES Boot Loader (IES-HBOOT-M), Version 12.2 [mchou-v122ldr0328 102] Switch uptime is 2 days, 1 hour, 36 minutes System returned to ROM by power-on System image file is ''flash:/ies-lanbase-mz.122-44.EX/ies-lanbase-mz.122-44.EX.bin'' cisco IE-3000-4TC (PowerPC405) processor with 126976K/4088K bytes of memory. Processor board ID FHK1152UZRW Last reset from power-on 1 Virtual Ethernet interface 20 FastEthernet interfaces 2 Gigabit Ethernet interfaces The password-recovery mechanism is enabled. 64K bytes of flash-simulated non-volatile configuration memory. 2-476 Cisco IE 3000 Switch Command Reference OL-13019-01