Cisco IE-3000-8TC Command Reference - Page 38
alarm profile (interface configuration
![]() |
View all Cisco IE-3000-8TC manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 38 highlights
alarm profile (interface configuration) Chapter 2 IE 3000 Switch Cisco IOS Commands alarm profile (interface configuration) Use the alarm profile interface configuration command to attach an alarm profile to a port. Use the no form of this command to detach the profile from the port. alarm profile name no alarm profile Syntax Description name Alarm profile name Defaults The alarm profile defaultPort is applied to all interfaces. In this profile, only the Port Not Operating alarm is enabled. Command Modes Interface configuration Command History Release 12.2(44)EX Modification This command was introduced. Usage Guidelines Use the alarm profile global configuration command to create the alarm profile, enabling one or more alarms and specifying the alarm options. You can attach only one alarm profile to an interface. When you attach an alarm profile to an interface, it overwrites any previous alarm profile that was attached to the interface (including the defaultPort profile). Examples This example shows how to attach an alarm profile named fastE to a port: Switch(config)# interface fastethernet1/2 Switch(config-if)# alarm profile fastE This example shows how to detach the alarm profile from a port and return it to the defaultPort profile: Switch(config)# interface fastethernet1/2 Switch(config-if)# no alarm profile Related Commands Command alarm profile (global configuration) show alarm profile Description Creates or identifies an alarm profile and enters alarm-profile configuration mode. Displays all alarm profiles or a specified alarm profile and lists the interfaces to which each profile is attached. 2-12 Cisco IE 3000 Switch Command Reference OL-13019-01
![](/manual_guide/products/cisco-ie30008tc-command-reference-94363f4/38.png)