Cisco IE-3000-8TC Command Reference - Page 506
show vlan summary, show vlan id, Table 2-32, show vlan Command Output Fields
View all Cisco IE-3000-8TC manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 506 highlights
show vlan Chapter 2 IE 3000 Switch Cisco IOS Commands Table 2-32 show vlan Command Output Fields Field VLAN Name Status Ports Type SAID MTU Parent RingNo BrdgNo Stp BrdgMode Trans1 Trans2 Remote SPAN VLANs Primary/Secondary/ Type/Ports Description VLAN number. Name, if configured, of the VLAN. Status of the VLAN (active or suspend). Ports that belong to the VLAN. Media type of the VLAN. Security association ID value for the VLAN. Maximum transmission unit size for the VLAN. Parent VLAN, if one exists. Ring number for the VLAN, if applicable. Bridge number for the VLAN, if applicable. Spanning Tree Protocol type used on the VLAN. Bridging mode for this VLAN-possible values are source-route bridging (SRB) and source-route transparent (SRT); the default is SRB. Translation bridge 1. Translation bridge 2. Identifies any RSPAN VLANs that have been configured. - This is an example of output from the show vlan summary command: Switch> show vlan summary Number of existing VLANs : 45 Number of existing VTP VLANs : 45 Number of existing extended VLANs : 0 This is an example of output from the show vlan id command. Switch# show vlan id 2 VLAN Name Status Ports 2 VLAN0200 active Fa1/3, Fa2/5, Fa2/6 2 VLAN0200 active Fa1/3, Fa2/5, Fa2/6 VLAN Type SAID MTU Parent RingNo BridgeNo Stp BrdgMode Trans1 Trans2 2 enet 100002 1500 - - - - - 0 0 Remote SPAN VLAN Disabled 2-480 Cisco IE 3000 Switch Command Reference OL-13019-01