Cisco IE-3000-8TC Command Reference - Page 33

Chapter 2 IE 3000 Switch Cisco IOS Commands alarm facility power-supply alarm facility power-supply Use the alarm facility power-supply global configuration command to set the alarm options for a missing or failing power supply when the system is operating in dual power-supply mode. Use the no form of the command to disable the specified setting. alarm facility power-supply {disable | notifies | relay {major | minor} | syslog} no alarm facility power-supply {disable | notifies | relay {major | minor} | syslog} Syntax Description disable notifies relay major relay minor syslog Disable the power supply alarm. Send power supply alarm traps to an SNMP server. Send the alarm to the major relay circuitry. Send the alarm to the minor relay circuitry. Send power supply alarm traps to a syslog server. Defaults A power supply alarm message is stored but not sent to an SNMP server, to a relay, or to a syslog server. Command Modes Global configuration Command History Release 12.2(44)EX Modification This command was introduced. Usage Guidelines Power supply alarms are generated only when the system is in dual power-supply mode. When a second power supply is connected, you must use the power-supply dual global configuration command to set dual power-mode operation. Before you use the notifies keyword to send alarm traps to an SNMP host, you need to set up an SNMP server by using the snmp-server enable traps global configuration command. Examples This example shows how to set the power-supply monitoring alarm to go to the minor relay circuitry: Switch(config)# alarm facility power-supply relay minor Related Commands Command power-supply dual show alarm settings snmp-server enable traps Description Sets the switch to operate in dual power-supply mode. Displays environmental alarm settings and options. Enables the switch to send SNMP notification for various trap types to the network management system (NMS). OL-13019-01 Cisco IE 3000 Switch Command Reference 2-7