Dell PowerEdge C6300 Dell PowerEdge C6320 Owners Manual - Page 102
these cables properly when you replace them to prevent the cables from being pinched or crimped.
View all Dell PowerEdge C6300 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 102 highlights
Figure 74. Removing and installing the mid-plane holder support 1. screw (3) 2. mid-plane holder support 15. Remove the screws that secure the mid-plane holder to the chassis. 16. Lift the mid-plane holder out of the chassis. Figure 75. Removing and installing the mid-plane holder 1. screw (6) 2. mid-plane holder 17. Disconnect all the cables from the lower middle plane. Note the routing of the cable on the chassis as you remove them from the system. You must route these cables properly when you replace them to prevent the cables from being pinched or crimped. 18. Remove the power cable cover from the lower middle plane. 19. Remove the four power cables from the lower middle plane. 102
Figure 74. Removing and installing the mid-plane holder support
1.
screw (3)
2.
mid-plane holder support
15.
Remove the screws that secure the mid-plane holder to the chassis.
16.
Lift the mid-plane holder out of the chassis.
Figure 75. Removing and installing the mid-plane holder
1.
screw (6)
2.
mid-plane holder
17.
Disconnect all the cables from the lower middle plane.
Note the routing of the cable on the chassis as you remove them from the system. You must route
these cables properly when you replace them to prevent the cables from being pinched or crimped.
18.
Remove the power cable cover from the lower middle plane.
19.
Remove the four power cables from the lower middle plane.
102