Dell PowerEdge C6300 Dell PowerEdge C6320 Owners Manual - Page 111
You must route these cables properly when you replace them to prevent the cables from being
View all Dell PowerEdge C6300 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 111 highlights
5. SATA2 hard drive connectors 1 to 6 for system board 2 (from right to left) 7. SGPIO connector A for system board 1 9. SGPIO connector A for system board 2 11. SGPIO connector A for system board 3 13. SGPIO connector A for system board 4 15. backplane power connector for power supply unit 2 6. SATA2 hard drive connectors 1 to 6 for system board 1 (from right to left) 8. SGPIO connector B for system board 1 10. SGPIO connector B for system board 2 12. SGPIO connector B for system board 3 14. SGPIO Connector B for system board 4 5. Disconnect front panel cables from the power distribution board. NOTE: Observe the routing of the cable on the chassis as you remove them from the system. You must route these cables properly when you replace them to prevent the cables from being pinched or crimped. 6. Remove the screws that secure the hard-drive cage to the chassis. Figure 85. Removing and installing the direct backplane 1. hard drive cage 2. screw (2) 7. Remove the screws that secure the front-panel assemblies to the chassis. 8. Remove the hard-drive cage from the chassis. 111