Dell PowerEdge C6300 Dell PowerEdge C6320 Owners Manual - Page 62
Removing a power supply unit
View all Dell PowerEdge C6300 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 62 highlights
PSU 1400 W 1600 W Four system boards Up to two 120 W processor / MB, three hard drives / MB, four memory modules / MB Up to two 120 W processor / MB, three hard drives / MB, eight memory modules / MB Removing a power supply unit CAUTION: Many repairs may only be done by a certified service technician. You should only perform troubleshooting and simple repairs as authorized in your product documentation, or as directed by the online or telephone service and support team. Damage due to servicing that is not authorized by Dell is not covered by your warranty. Read and follow the safety instructions that came with the product. CAUTION: The System requires at least one power supply unit to operate normally. 1. Recommended to turn off the system, including any attached peripherals, and disconnect the system from the electrical outlet. 2. Disconnect the power cable from the power source and the power supply unit. 3. Press the release lever and using the handle, slide the power supply unit out of the system. NOTE: Removing the power supply unit may require considerable force. Figure 35. Removing and installing a power supply unit 1. power supply unit 3. handle 2. release lever Installing a power supply unit CAUTION: Many repairs may only be done by a certified service technician. You should only perform troubleshooting and simple repairs as authorized in your product documentation, or as directed by the online or telephone service and support team. Damage due to servicing that is not authorized by Dell is not covered by your warranty. Read and follow the safety instructions that came with the product. 62