Dell Poweredge C4130 Dell Owners Manual - Page 114
Removing a GPU riser cable from the system board
View all Dell Poweredge C4130 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 114 highlights
5. guide pin on the chassis (2) Removing a GPU riser cable from the system board Prerequisites NOTE: This is a Field Replaceable Unit (FRU). Removal and installation procedures should only be done by Dell certified service technicians. CAUTION: Many repairs may only be done by a certified service technician. You should only perform troubleshooting and simple repairs as authorized in your product documentation, or as directed by the online or telephone service and support team. Damage due to servicing that is not authorized by Dell is not covered by your warranty. Read and follow the safety instructions that came with the product. CAUTION: The GPU riser cables should be removed before removing the GPUs to prevent pin damage in the GPU connectors on the system board. 1. Ensure that you read the Safety instructions. 2. Follow the procedure listed in Before working inside your system. Steps 1. Press the release latches located on the GPU riser cable connector on the system board. NOTE: Pressing the release latches will not eject the GPU riser cable from the system board. 2. Pull the GPU riser cable out of the GPU riser cable connector on the system board. Figure 48. Removing and installing a GPU riser cable from the system board 1. riser cable connector 3. release latch 2. riser cable connector on the system board 114