Dell Poweredge C4130 Dell Owners Manual - Page 69
PCIe shroud, Removing the PCIe shroud
View all Dell Poweredge C4130 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 69 highlights
3. positive side of the battery connector 3. To install a new system battery, hold the battery with the "+" sign facing up and slide it under the securing tabs at the positive side of the connector. 4. Press the battery into the connector until it locks into place. Figure 21. Installing the system battery 1. system battery 2. positive side of the battery connector Next steps 1. Connect the GPU signal and power cables to the system board. 2. Follow the procedure listed in After working inside your system. 3. While booting, press to enter System Setup and ensure that the battery is operating properly. 4. Enter the correct time and date in the System Setup Time and Date fields. 5. Exit System Setup. Related Links System board connectors Installing a GPU riser cable on the system board Installing a processor blank PCIe shroud Removing the PCIe shroud Prerequisites CAUTION: Many repairs may only be done by a certified service technician. You should only perform troubleshooting and simple repairs as authorized in your product documentation, or as directed by the online or telephone service and support team. Damage due to servicing that is not authorized by Dell is not covered by your warranty. Read and follow the safety instructions that came with the product. 69