Dell Poweredge C4130 Dell Owners Manual - Page 96
Installing a 1.8 inch uSATA SSD into a SSD carrier, Removing the 1.8 inch uSATA SSD cage
View all Dell Poweredge C4130 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 96 highlights
Next steps Install the SSD into the SSD carrier. Related Links Installing a 1.8 inch uSATA SSD into a SSD carrier Installing a 1.8 inch uSATA SSD into a SSD carrier Prerequisites CAUTION: Many repairs may only be done by a certified service technician. You should only perform troubleshooting and simple repairs as authorized in your product documentation, or as directed by the online or telephone service and support team. Damage due to servicing that is not authorized by Dell is not covered by your warranty. Read and follow the safety instructions that came with the product. Steps 1. Insert the SSD into the SSD carrier with the connector end of the SSD toward the back of the SSD carrier. 2. Press the SSD until it is firmly seated. Removing the 1.8 inch uSATA SSD cage Prerequisites CAUTION: Many repairs may only be done by a certified service technician. You should only perform troubleshooting and simple repairs as authorized in your product documentation, or as directed by the online or telephone service and support team. Damage due to servicing that is not authorized by Dell is not covered by your warranty. Read and follow the safety instructions that came with the product. 1. Ensure that you read the Safety instructions. 2. Follow the procedure listed in Before working inside your system. 3. Remove the 1.8 inch SSD(s) from the SSD cage. For more information, see Removing a 1.8 inch uSATA SSD carrier. Steps Hold the SSD cage by the edges and lift the cage out of the chassis. The SSD backplane is attached to the SSD cage. When you lift the SSD cage, the backplane will disengage from the backplane connector on the system board. 96