Dell Poweredge C4130 Dell Owners Manual - Page 38
Recommended tools, System covers, Removing the system top cover (front)
View all Dell Poweredge C4130 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 38 highlights
Recommended tools You need the following tools to perform the removal and installation procedures: • Phillips #2 screwdriver • Phillips #1 screwdriver • Torx T10 screwdriver System covers Removing the system top cover (front) Prerequisites CAUTION: Do not operate the system without the system cover. This can result in overheating and cause component damage. 1. Ensure that you read the Safety instructions. 2. Turn off the system, including any attached peripherals. 3. Disconnect the system from the electrical outlet and disconnect the peripherals. Steps 1. Turn the system cover lock to the unlocked position. 2. Press the release tabs on the system top cover, and slide the cover toward the front of the system. 3. Hold the cover on both sides, and lift the cover away from the system. Figure 6. Removing and installing the system top cover (front) 1. system cover lock 2. release tab (2) 38