Dell Poweredge C4130 Dell Owners Manual - Page 118
Removing the custom GPU brackets from the GPU removed from your system, I/O bracket
View all Dell Poweredge C4130 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 118 highlights
Removing the custom GPU brackets from the GPU removed from your system The Nvidia or Intel brackets are installed on the Nvidia or Intel GPUs shipped with your system. These brackets should be removed from the Nvidia or Intel GPUs removed from your system and installed on the replacement GPUs. Prerequisites NOTE: This is a Field Replaceable Unit (FRU). Removal and installation procedures should be performed only by Dell certified service technicians. CAUTION: Many repairs may only be done by a certified service technician. You should only perform troubleshooting and simple repairs as authorized in your product documentation, or as directed by the online or telephone service and support team. Damage due to servicing that is not authorized by Dell is not covered by your warranty. Read and follow the safety instructions that came with the product. 1. Ensure that you read the Safety instructions. 2. Keep the Philips #1 and #2 screwdrivers ready. 3. Remove the GPU riser cable board. For more information, see Removing a GPU riser cable board. Steps 1. Remove the screws securing the front I/O bracket to the GPU, and remove the I/O bracket. 2. Remove the screws securing the support bracket to the GPU, and remove the support bracket. Figure 51. Removing and installing the custom Nvidia GPU I/O brackets and the support brackets 1. support bracket 3. I/O bracket 2. GPU 4. screw (7) 118