HP Armada 1100 Armada 1100 Family of Personal Computers Maintenance and Servic - Page 138
Lift the display cable out of the connector slide [3], being careful
View all HP Armada 1100 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 138 highlights
The ZIF connector and its attached cable can be damaged easily. Handle only the connector slide when disconnecting the ZIF connector. Never pull or twist the cable itself while it is seated in the ZIF connector 4. Remove the display cable from the system board by pulling up both ends of the ZIF connector slide simultaneously [1], carefully opening the slide [2] (Figure 5-82). 5. Lift the display cable out of the connector slide [3], being careful not to pull or twist the cable (Figure 5-82). 6. Disconnect the display ground cable [1] from the flex ground bracket above the serial port connector (Figure 5-83).
The ZIF connector and its attached cable can be damaged easily. Handle
only the connector slide when disconnecting the ZIF connector. Never pull
or twist the cable itself while it is seated in the ZIF connector.
>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>><<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<
4. Remove the display cable from the system board by pulling up both ends
of the ZIF connector slide simultaneously [1], carefully opening the
slide [2] (Figure 5-82).
5. Lift the display cable out of the connector slide [3], being careful
not to pull or twist the cable (Figure 5-82).
6. Disconnect the display ground cable [1] from the flex ground bracket
above the serial port connector (Figure 5-83).