HP Armada 1100 Armada 1100 Family of Personal Computers Maintenance and Servic - Page 144
Replacing the Display Ground Cable, Display Cable, Shield, and the CSTN
View all HP Armada 1100 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 144 highlights
Replacing the Display Ground Cable, Display Cable, Shield, and the CSTN (10.4 in) Panel To replace the display ground cable, display cable, shield, and the CSTN (10.4 in) panel, follow these steps: 1. Position the display ground cable in the display enclosure, aligning the cable with the bosses in the display enclosure (Figure 5-91). 2. Connect the display cable to the XOVER Board. Then connect the XOVER Board to the connector on the back of the panel (Figure 5-92).
Replacing the Display Ground Cable, Display Cable, Shield, and the CSTN
(10.4 in) Panel
To replace the display ground cable, display cable, shield, and the CSTN
(10.4 in) panel, follow these steps:
1. Position the display ground cable in the display enclosure, aligning
the cable with the bosses in the display enclosure (Figure 5-91).
2. Connect the display cable to the XOVER Board. Then connect the XOVER
Board to the connector on the back of the panel (Figure 5-92).