HP Armada 1100 Armada 1100 Family of Personal Computers Maintenance and Servic - Page 165
Connect the display cable and backlight cable to the inverter board
View all HP Armada 1100 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 165 highlights
21. Replace the display ground cable, the LCD panel, the shield, and the display cable into the display enclosure as follows: o If replacing a CSTN (10.4 in) panel and shield, refer to Section 5.20. o If replacing a CTFT (10.4 in) panel and shield, refer to Section 5.21. 22. Connect the display cable and backlight cable to the inverter board (Section 5.19). 23. Replace the inverter board (Section 5.19). 24. Replace the display latches and springs (Section 5.19). 25. Replace the bezel (Section 5.19). 26. Position the display clutches at a 90-degree angle (Figure 5-117).
21. Replace the display ground cable, the LCD panel, the shield, and the
display cable into the display enclosure as follows:
o If replacing a CSTN (10.4 in) panel and shield, refer to Section
5.20.
o If replacing a CTFT (10.4 in) panel and shield, refer to Section
5.21.
22. Connect the display cable and backlight cable to the inverter board
(Section 5.19).
23. Replace the inverter board (Section 5.19).
24. Replace the display latches and springs (Section 5.19).
25. Replace the bezel (Section 5.19).
26. Position the display clutches at a 90-degree angle (Figure 5-117).