HP Photosmart C7100 Basics Guide - Page 34
No signal, Not applicable, number, Open System, Shared Key, WPA-PSK, Signal Strength
View all HP Photosmart C7100 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 34 highlights
Network setup (continued) Parameter Description Network Name (SSID) Service Set Identifier. A unique identifier (up to 32 characters) that differentiates one wireless local area network (WLAN) from another. The SSID is also referred to as the network name. This is the name of the network to which the HP All-in-One is connected. Signal Strength (1-5) The transmitting or return signal graded on a scale of 1 to 5: ● 5: Excellent ● 4: Good ● 3: Fair ● 2: Poor ● 1: Marginal ● No signal: No signal detected on the network. ● Not applicable: This parameter does not apply to this network type. Channel The channel number currently being used for wireless communication. This depends on the network in use, and might differ from the requested channel number. Value is from 1 to 14; countries/ regions might limit the range of approved channels. ● (number): Value ranging from 1 to 14, depending on country/ region. ● None: No channel is in use. ● Not Applicable: The WLAN is disabled or this parameter does not apply to this network type. Note In ad hoc mode, if you are not able to receive or transmit data between your computer and the HP All-in-One, make sure that you are using the same communication channel on your computer and the HP All-in-One. In infrastructure mode, the channel is dictated by the access point. Authentication type Type of authentication in use: ● None: No authentication in use. ● Open System (ad hoc and infrastructure): No authentication ● Shared Key: WEP key is required. ● WPA-PSK (infrastructure only): WPA with Pre-Shared Key. ● Not applicable: This parameter does not apply to this network type. Authentication verifies the identity of a user or device before granting access to the network, making it more difficult for unauthorized users to access network resources. This security method is common on wireless networks. A network using Open System authentication does not screen network users based on their identities. Any wireless user can have access from the network. However, such a network might use WEP (Wired Equivalent Privacy) encryption to provide a first level of security against casual eavesdroppers. Basics Guide 31