Lenovo ThinkStation P700 (English) User Guide - ThinkStation P500 (type 30A6, - Page 117
corresponding holes in the converter., Push the metal bracket down until the tab
View all Lenovo ThinkStation P700 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 117 highlights
9. Push the metal bracket down until the tab 1 is slightly curved, and then push the bracket with the storage drive forward as shown until the tab 1 snaps into position. Figure 56. Installing the metal bracket into the plastic frame of the converter 10. Flex the sides of the storage drive bracket and align the four pins 1 on the bracket with the corresponding holes in the converter. Note: Ensure that the circuit board faces upward and the connectors 2 face toward the front of the bracket. Figure 57. Installing the converter into the type 1 bracket 11. Slide the storage drive bracket with the converter into the storage drive bay. Chapter 9. Installing or replacing hardware 105
9. Push the metal bracket down until the tab
1
is slightly curved, and then push the bracket with the
storage drive forward as shown until the tab
1
snaps into position.
Figure56. Installing the metal bracket into the plastic frame of the converter
10. Flex the sides of the storage drive bracket and align the four pins
1
on the bracket with the
corresponding holes in the converter.
Note:
Ensure that the circuit board faces upward and the connectors
2
face toward the front of the
bracket.
Figure57. Installing the converter into the type
1
bracket
11. Slide the storage drive bracket with the converter into the storage drive bay.
Chapter 9
.
Installing or replacing hardware
105