Lenovo ThinkStation P700 (English) User Guide - ThinkStation P500 (type 30A6, - Page 138
Installing or replacing a flex adapter,
View all Lenovo ThinkStation P700 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 138 highlights
• If you are installing a memory module, open the retaining clips of the memory slot into which you want to install the memory module. Figure 87. Opening the retaining clips 8. Position the new memory module over the memory slot. Ensure that the notch 1 on the memory module aligns correctly with the slot key 2 on the system board. Push the memory module straight down into the slot until the retaining clips close. Figure 88. Installing a memory module 9. Reinstall the optical drive bracket if you have removed it. See "Removing and reinstalling the optical drive bracket" on page 83. 10. Reinstall the direct cooling air baffle. See "Removing and reinstalling the direct cooling air baffle" on page 78. What to do next: • To work with another piece of hardware, go to the appropriate section. • To complete the installation or replacement, go to "Completing the parts replacement" on page 130. Installing or replacing a flex adapter Attention: Do not open your computer or attempt any repair before reading and understanding the "Read this first: Important safety information" on page v. Depending on your computer model, the type of flex adapter on your computer varies. 126 ThinkStation P500 and P700 User Guide