Netgear GS728TPP GS728TP/GS728TPP/GS752TP Software Administration Manual - Page 211

GS752TP, GS728TP, and GS728TPP Gigabit Smart Switches The following screen displays: The following fields are displayed: • Interface. The ports on the system. • Total Packets Received Without Errors. The total number of packets received that were without errors. • Packets Received With Error. The number of inbound packets that contained errors preventing them from being deliverable to a higher-layer protocol. • Broadcast Packets Received. The total number of good packets received that were directed to the broadcast address. This does not include multicast packets. • Packets Transmitted Without Errors. The number of frames that have been transmitted by this port to its segment. • Transmit Packet Errors. The number of outbound packets that were not transmitted because of errors. • Collision Frames. The best estimate of the total number of collisions on this Ethernet segment. 2. Click either PORTS, LAGS or ALL to display statistics for a specific type of interface or for all interfaces. 3. Use the buttons at the bottom of the screen to perform the following actions on either ports, LAGs or both: • To clear all the counters for all interfaces on the switch, select the check box in the row heading and click CLEAR. The button sets all statistics for all ports to 0. • To clear the counters for a specific interfaces, select the check box associated with the port and click CLEAR. You can also enter the interface name in the Go To Interface field and click GO. This selects the interface and clears its counters. Monitoring the System 211