Netgear GS728TPP GS728TP/GS728TPP/GS752TP Software Administration Manual - Page 52
Trap Configuration, Community String
View all Netgear GS728TPP manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 52 highlights
GS752TP, GS728TP, and GS728TPP Gigabit Smart Switches Trap Configuration This screen displays an entry for every active Trap Receiver. To configure SNMP trap settings: Select System SNMP SNMP v1/v2 Trap Configuration. The following screen displays: To add a host that receives SNMP traps: 1. Enter trap configuration information in the following fields: • Recipients IP. The address in x.x.x.x format to receive SNMP traps from this device. • Version. The trap version used by the receiver. • SNMP v1. Uses SNMP v1 to send traps to the receiver. • SNMP v2. Uses SNMP v2 to send traps to the receiver. • Community String. The community string for the SNMP trap packet sent to the trap manager. This community string can be up to 16 characters and is case-sensitive. 2. Click ADD. Configuration changes take effect immediately. To modify information about an existing SNMP recipient: 1. Select the check box next to the recipient, and change the desired fields. 2. Click APPLY. Configuration changes take effect immediately. Configuring System Information 52