Netgear GS728TPP GS728TP/GS728TPP/GS752TP Software Administration Manual - Page 81
Short, APPLY, Specifies a long time-out value.
View all Netgear GS728TPP manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 81 highlights
GS752TP, GS728TP, and GS728TPP Gigabit Smart Switches The following screen displays: 2. Select the check box next to the port to configure. You can select multiple ports to apply the same settings to all selected ports. Note: You cannot select ports that are not participating in a LAG. 3. Configure the LACP Priority value for the selected port. The valid range is 0-255. The default value is 128. 4. Configure the administrative LACP Timeout value. • Long. Specifies a long time-out value. • Short. Specifies a short time-out value. 5. Click APPLY to send the updated configuration to the switch. Configuration changes take effect immediately. Configuring Switching Information 81
Configuring Switching Information
81
GS752TP, GS728TP, and GS728TPP Gigabit Smart Switches
The following screen displays:
2.
Select the check box next to the port to configure.
You can select multiple ports to apply the same settings to all selected ports.
Note:
You cannot select ports that are not participating in a LAG.
3.
Configure the LACP Priority value for the selected port.
The valid range is 0–255. The default value is 128.
4.
Configure the administrative LACP Timeout value.
•
Long
. Specifies a long time-out value.
•
Short
. Specifies a short time-out value.
5.
Click
APPLY
to send the updated configuration to the switch.
Configuration changes take effect immediately.