Netgear GS728TPP GS728TP/GS728TPP/GS752TP Software Administration Manual - Page 30
IPv6 Address Auto Configuration Mode, IPv6 Prefix/Prefix Length
View all Netgear GS728TPP manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 30 highlights
GS752TP, GS728TP, and GS728TPP Gigabit Smart Switches The following screen displays: 2. In the Global Configuration Section, configure the following: • Admin Mode. Enable or disable the IPv6 network interface on the switch. The default value is Enable. • IPv6 Address Auto Configuration Mode. The IPv6 address for the IPv6 network interface is automatically configured if this option is enabled. The default value is Disable. • IPv6 Gateway. Specify the gateway for the IPv6 network interface. The gateway address is in IPv6 global or link-local address format. 3. Click APPLY to apply the changes to the system. To modify IPv6 addresses on the network interface: 1. Select System Management IPv6 Network Configuration. 2. in the IPv6 Network Interface Configuration section, configure the following: • IPv6 Prefix/Prefix Length. Select an existing IPv6 prefix and prefix length from the list, or add a new IPv6 prefix and prefix length to the list of IPv6 addresses. The address is in the global address format. • EUI64. Specify whether the IPv6 address is in EUI-64 format. The default value is False. 3. Click ADD to add a new IPv6 address, or click DELETE to delete a selected IPv6 address from the list of IPv6 addresses. 4. Click APPLY to apply the changes to the system. Configuring System Information 30