Netgear GS748Tv4 GS748Tv4 Software Administration Manual - Page 101
Rapid STP, MST Configuration, Switching, Advanced, Refresh
View all Netgear GS748Tv4 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 101 highlights
GS748T Smart Switch Software Administration Manual Rapid STP Use the Rapid STP page to view information about Rapid Spanning Tree (RSTP) port status. To display the Rapid STP page, click Switching > STP > Advanced > RSTP. The following table describes the Rapid STP Status information displayed on the screen. Field Interface Role Mode Fast Link Status Description The physical or port channel interfaces associated with VLANs associated with the CST. Each MST Bridge Port that is enabled is assigned a Port Role for each spanning tree. The port role will be one of the following values: Root Port, Designated Port, Alternate Port, Backup Port, Master Port, or Disabled Port. Specifies the spanning tree operation mode. Different modes are STP, RSTP, and MSTP. Indicates whether the port is enabled as an edge port. The Forwarding State of this port. Click Refresh to update the information on the screen with the most current data. MST Configuration Use the Spanning Tree MST Configuration page to configure Multiple Spanning Tree (MST) on the switch. To display the Spanning Tree MST Configuration page, click Switching > STP > Advanced > MST Configuration. Chapter 3: Configuring Switching Information | 101