Netgear GS748Tv4 GS748Tv4 Software Administration Manual - Page 164
Access Rule Configuration, Refresh, Security, Access, and then click the, Access Control
View all Netgear GS748Tv4 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 164 highlights
GS748T Smart Switch Software Administration Manual The Profile Summary table shows the rules that are configured for the profile, as the following table describes. Field Rule Type Service Type Source IP Address Mask Description Identifies the action the rule takes, which is either Permit or Deny. Displays the type of service to allow or prohibit from accessing the switch management interface: • SNMP • HTTP • HTTPS Displays the IP Address of the client that may or may not originate management traffic. Displays the subnet mask associated with the IP address. Priority Displays the priority of the rule. The rules are validated against the incoming management request in the ascending order of their priorities. If a rule matches, action is performed and subsequent rules below are ignored. Click Refresh to update the page with the most current information. Access Rule Configuration Use the Access Rule Configuration page to configure the rules about what systems can access the GS748T Web interface and what protocols are allowed. To access the Access Rule Configuration page, click Security > Access, and then click the Access Control > Access Rule Configuration link. 164 | Chapter 5: Managing Device Security