Netgear GS748Tv4 GS748Tv4 Software Administration Manual - Page 39

GS748T Smart Switch Software Administration Manual 6. IPv6 Prefix/Prefix Length. Add the IPv6 prefix and prefix to the IPv6 network interface. The address is in the global address format. 7. EUI64. Specify whether format IPv6 address in EUI-64 format. The default value is False. 8. Click Add to add a new IPv6 address in global format. 9. Click DELETE to delete a selected IPv6 address. 10. Click Apply to apply the changes to the system. Update the switch with the values on the screen. If you want the switch to retain the new values across a power cycle, you must perform a save. 11. Click Cancel to cancel the configuration on the screen and reset the data on the screen to the latest value of the switch. IPv6 Network Neighbor Use the IPv6 Network Neighbor page to configure the IPv6 Network Interface IPv6 Neighbor Table. To access the page, click System > Management > IPv6 Network Neighbor. A screen similar to the following displays. • IPv6 Address. Specifies the IPv6 address of neighbor or interface. • MAC Address. Specifies MAC address associated with an interface. • IsRtr. Indicates whether the neighbor is a router. If the neighbor is a router, the value is True. If the neighbor is not a router, the value is False. • Neighbor State. Specifies the state of the neighbor cache entry. The following are the states for dynamic entries in the IPv6 neighbor discovery cache: Chapter 2: Configuring System Information | 39