Netgear GS748Tv4 GS748Tv4 Software Administration Manual - Page 132
Advanced, DSCP to Queue, Mapping, Cancel, Apply
View all Netgear GS748Tv4 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 132 highlights
GS748T Smart Switch Software Administration Manual To display the IP DSCP Mapping page, click QoS > CoS > Advanced > DSCP to Queue Mapping. To map DSCP values to queues: 1. For each DSCP value, select a hardware queue to associate with the value. The traffic class is the hardware queue for a port. Higher traffic class values indicate a higher queue position. Before traffic in a lower queue is sent, it must wait for traffic in higher queues to be sent. Valid range is 0-7. 2. Click Cancel to cancel the configuration on the screen and reset the data on the screen to the latest value of the switch. 3. If you make changes to the page, click Apply to apply the changes to the system. 132 | Chapter 4: Configuring Quality of Service
132
|
Chapter 4:
Configuring Quality of Service
GS748T Smart Switch Software Administration Manual
To display the IP DSCP Mapping page, click
QoS
>
CoS
>
Advanced
>
DSCP to Queue
Mapping
.
To map DSCP values to queues:
1.
For each DSCP value, select a hardware queue to associate with the value.
The traffic class is the hardware queue for a port. Higher traffic class values indicate a
higher queue position. Before traffic in a lower queue is sent, it must wait for traffic in
higher queues to be sent. Valid range is 0–7.
2.
Click
Cancel
to cancel the configuration on the screen and reset the data on the screen to
the latest value of the switch.
3.
If you make changes to the page, click
Apply
to apply the changes to the system.