Netgear GS748Tv4 GS748Tv4 Software Administration Manual - Page 222
Reset, Device Reboot, Factory Default
View all Netgear GS748Tv4 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 222 highlights
GS748T Smart Switch Software Administration Manual Reset The Reset menu contains links to the following options: • Device Reboot on page 222 • Factory Default on page 222 Device Reboot Use the Device Reboot page to reboot the GS748T. To access the Device Reboot page, click Maintenance > Reset > Device Reboot. To reboot the switch: 1. Select the check box on the page. 2. Click Apply. The switch resets immediately. The management interface is not available until the switch completes the boot cycle. After the switch resets, the login screen appears. Factory Default Use the Factory Default page to reset the system configuration to the factory default values. Note: If you reset the switch to the default configuration, the IP address is reset to 192.168.0.239, and the DHCP client is enabled. If you loose 222 | Chapter 7: Maintenance