Netgear GS748Tv4 GS748Tv4 Software Administration Manual - Page 119
Switching, Multicast, IGMP Snooping Querier, Querier VLAN, Status, To access this click
View all Netgear GS748Tv4 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 119 highlights
GS748T Smart Switch Software Administration Manual To access this page, click Switching > Multicast > IGMP Snooping Querier > Querier VLAN Status. The following table describes the information available on the Querier VLAN Status page. Field VLAN ID Operational State Operational Version Last Querier Address Description Specifies the VLAN ID on which the IGMP Snooping Querier is administratively enabled and for which VLAN exists in the VLAN database. Specifies the operational state of the IGMP Snooping Querier on a VLAN: • Querier: The snooping switch is the querier in the VLAN. The snooping switch will send out periodic queries with a time interval equal to the configured querier query interval. If the snooping switch sees a better querier (numerically lower) in the VLAN, it moves to non-querier mode. • Non-Querier: The snooping switch is in non-querier mode in the VLAN. If the querier expiry interval timer expires, the snooping switch moves into querier mode. • Disabled: The snooping querier is not operational on the VLAN. The snooping querier moves to disabled mode when IGMP snooping is not operational on the VLAN, when the querier address is not configured, or the network management address is not configured. Displays the IGMP protocol version of the operational querier. Displays the IP address of the last querier from which a query was snooped on the VLAN. Chapter 3: Configuring Switching Information | 119