Netgear GS748Tv4 GS748Tv4 Software Administration Manual - Page 216

GS748T Smart Switch Software Administration Manual the host. For example, if you select Error, the logged messages include Error, Critical, Alert, and Emergency. The default severity level is Alert (1). The severity can be one of the following levels: • Emergency (0): The highest level warning level. If the device is down or not functioning properly, an emergency log is saved to the device. • Alert (1): The second highest warning level. An alert log is saved if there is a serious device malfunction, such as all device features being down. • Critical (2): The third highest warning level. A critical log is saved if a critical device malfunction occurs, for example, two device ports are not functioning, while the rest of the device ports remain functional. • Error (3): A device error has occurred, such as if a port is offline. • Warning (4): The lowest level of a device warning. • Notice (5): Provides the network administrators with device information. • Informational (6): Provides device information. • Debug (7): Provides detailed information about the log. Debugging should only be entered by qualified support personnel. 2. To delete an existing host, select the check box next to the host and click Delete. 3. To modify the settings for an existing host, select the check box next to the host, change the desired information, and click Apply. 4. Click Cancel to cancel the configuration on the screen and reset the data on the screen to the latest value of the switch. The Status field in the Server Configuration table shows whether the remote logging host is currently active. Trap Logs Use the Trap Logs page to view information about the SNMP traps generated on the switch. To access the Trap Logs page, click the Monitoring > Logs tab, and then click the Trap Logs link. 216 | Chapter 6: Monitoring the System