Netgear GS748Tv4 GS748Tv4 Software Administration Manual - Page 65
Configuring System Information, GS748T Smart Switch Software Administration Manual
View all Netgear GS748Tv4 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 65 highlights
GS748T Smart Switch Software Administration Manual The following table describes the detailed local information that displays for the selected port. Field Description Managed Address Address SubType Displays the type of address the management interface uses, such as an IPv4 address. Address Displays the address used to manage the device. Interface SubType Displays the port subtype. Interface Number Displays the number that identifies the port. MAC/PHY Details Auto-Negotiation Supported Specifies whether the interface supports port-speed auto-negotiation. The possible values are True or False. Auto-Negotiation Enabled Displays the port speed auto-negotiation support status. The possible values are True (enabled) or False (disabled). Auto Negotiation Advertised Displays the port speed auto-negotiation capabilities such as 1000BASE-T Capabilities half-duplex mode or 100BASE-TX full-duplex mode. Operational MAU Type Displays the Medium Attachment Unit (MAU) type. The MAU performs physical layer functions, including digital data conversion from the Ethernet interface collision detection and bit injection into the network. MED Details Capabilities Supported Displays the MED capabilities enabled on the port. Chapter 2: Configuring System Information | 65